System Configuration#
Station Config#
Current Config#
Displays the current system configuration. The imported configuration is displayed if an import has been performed, otherwise it is displayed as default. As shown in the following
Figure 5.63

Figure 5.63 Current Configuration
Reset System Config#
If you need to clear the system configuration, click “Reset” → “OK” to clear all the data, as shown in the figure below.

Figure 5.64 Reset System Configuration1

Figure 5.65 Reset System Configuration2
System Password#
When you need to reset your password, click “Reset” and enter the original password first, then enter the new password you need to change and enter the new password again and click “Confirm”. As shown in the picture below

Figure 5.69 Reset Password 1

Figure 5.70 Reset Password 2